WCA-150 Pallet Wrapper:
The Wulftec Advantage:
|
CAPACITIES |
PRODUCTION
- Up to 45 loads per hr., based on load configuration and machine options.
LOAD WEIGHT
- 4,000 lbs. maximum, with pallet bottom boards, running perpendicular to conveyor rollers.
- *Load stability may require softstart / softstop through optional variable frequency drive.
APPROXIMATE SHIPPING WEIGHT
- 3,734 to *4,034 lbs. (*Depends on options added)
MACHINE DIMENSIONS
|
LOAD SIZE
- Min 36"W x 36"L x 20"H.
- Max 50”W x 50”L x 76"H.
ELECTRICAL REQUIREMENTS
- 230/3/60 20AMPS
- (other voltages available upon request).
PNEUMATIC REQUIREMENTS
|
FEATURES |
CONTROLS
- 24V control system.
- Allen Bradley Micro Logix 1200 PLC.
- Allen Bradley Touch Screen Operator Interface.
- Sick auto height sensing photo-eye with on/off switch.
- On Stand NEMA 4 Control cabinet.
- Power on/off switch and indicator light.
- Manual/automatic switch.
- One Panel Mounted emergency stop station.
- Manual carriage function.
- Manual table jog.
- Manual clamp jog.
- Reset function.
- Separate top and bottom wrap selectors (0-9).
- Conveyor Jog Feature.
- Visual film break alarm.
- Current overload protection (fuses).
- Dust tight slip ring.
- 230VAC/3PH/60HZ Motors & VF Drives.
FILM DELIVERY SYSTEM
- Econo NO-THREAD™ 20” Powered Pre-Stretch Carriage.
- 1/2 HP 230VAC/3PH/60HZ Motor & VF Drive.
- 50% to 300% prestretch ratio (preset to customer spec.).
- Electronic film tension control with linear device. Film out/broken film sensor. Start and end of cycle film force release for easy pull.
- Three year warranty on prestretch rollers.
- Lexan safety cover.
FILM TAIL TREATMENT
- Auto film clamping/cutting.
- Pulsed controlled cutter.
- Film alignment arm.
- Brush-on film tail treatment.
FILM CARRIAGE DRIVE
- 1/2 HP 230VAC/3PH/60HZ Motor & VF Drive.
- Two #40 chain carriage lifts for safety.
- Machined UHMW-PE carriage glides on ½” CRS rails.
|
TURNTABLE DRIVE
- 25" ring gear bearing support and drive.
- 0-12 RPM variable speed.
- 1 HP 230VAC/3PH/60HZ Motor & VF Drive.
- Electronic soft start.
- Home Position with Proximity Sensor
- Electric brake
CONVEYOR
- 52"BFR standard.Pass height 18" standard.
- 5’ in / 5’ out powered contoured conveyor.
- 2-1/2" diameter rollers on 3 3/4" centers.
- 1/8" walls cold rolled electric welded steel tubing.
- All full rollers driven via #40 chain except contoured ones.
- 3/4 HP, 230VAC/3PH/60HZ.
- Motor and Contactor Starter.
- Heavy duty structural steel design, interlocking style for continuous equal roller spacing.
- Heavy duty Flange Mounted bearings.
- 30 FPM Fixed Conveyor Speed
STRUCTURE
- Formed steel tower.
Note: Depending upon system design and options, other controls may be required.
TECHNICAL INFORMATION
- The machine is provided with a manual including electro/mechanical schematics and drawings.
Note: Additional conveyor available upon request.
|
Note: All machine specifications are subject to change without prior notice. |
|