Production Rate
Ÿ
Up to 45 loads
per hr., based on load configuration and machine options.
Pneumatic Requirements
Ÿ
3 CFM @ 80 PSI.
Electrical Requirements
Ÿ
230/3/60
20AMPS
(other voltages available upon request).
Machine Dimensions
Ÿ
132"L x 199"W
x 110"H.
Load Size
Ÿ Min 36"W
x 36"L x 20"H.
Ÿ
Max
50”W x 50”L x 76"H.
Approximate Shipping Weight
Ÿ
3,734 to *4,034
lbs.
Load Weight
Ÿ
4,000 lbs standard.
Turntable Drive
Ÿ
25" ring gear
bearing support and drive.
Ÿ
0-12 RPM variable
speed.
Ÿ
1 HP 230VAC/3PH/60HZ
Motor & VF Drive.
Ÿ
Electronic soft
start.
Ÿ
Home Position with
Proximity Sensor
Ÿ
Electric brake
Conveyor
Ÿ
52" BFR standard.
Ÿ
Pass height 18"
standard.
Ÿ
5’ in / 5’ out
powered contoured conveyor.
Ÿ
2-1/2" diameter
rollers on 3" centers.
Ÿ
1/8" walls
cold rolled electric welded steel tubing.
Ÿ
All rollers driven
via #40 chain.
Ÿ
3/4
HP, 230VAC/3PH/60HZ
Motor and Contactor Starter
Ÿ
Heavy duty structural
steel design, interlocking style for continuous equal roller
spacing.
Ÿ
Heavy duty Flange
Mounted bearings.
Ÿ
30
FPM Fixed Conveyor Speed
Film Delivery System
Ÿ
Econo
NO-THREAD™ 20”
Powered Pre-Stretch Carriage.
Ÿ
1/2 HP 230VAC/3PH/60HZ
Motor & VF Drive.
Ÿ
50%
to 300% prestretch ratio
(preset to customer spec.).
Ÿ
Electronic film
tension control with linear device.
Ÿ
Film out/broken
film sensor.
Ÿ
Start and end of
cycle film force release for easy pull.
Ÿ
One Year guaranty
on prestretch rollers.
Ÿ
Lexan safety cover.
Film Carriage Drive
Ÿ
1/2 HP 230VAC/3PH/60HZ
Motor & VF Drive.
Ÿ
Two #50 chain carriage
lifts for safety.
Ÿ
Machined UHMW-PE
carriage
glides on ˝" CRS rails.
Film Tail Treatment
Ÿ
Auto film clamping/cutting.
Ÿ
Pulsed controlled
cutter.
Ÿ
Film alignment
arm.
Ÿ
Brush-on film tail
treatment.
Controls
Ÿ
24V control system.
Ÿ
Siemens S7-200
PLC
Ÿ
Siemens 4” Monochrome
Touch Screen Operator Interface
Ÿ
Sick auto height
sensing photoeye with on/off switch.
Ÿ
On Stand NEMA 4
Control cabinet.
Ÿ
Power on/off switch
and indicator light.
Ÿ
Manual/automatic
switch.
Ÿ
One Panel Mounted
emergency stop station
Ÿ
Manual carriage
function.
Ÿ
Manual table jog.
Ÿ
Manual clamp jog.
Ÿ
Reset function.
Ÿ
Separate top and
bottom wrap selectors (0-9).
Ÿ
Conveyor Jog Feature
Ÿ
Visual film break
alarm.
Ÿ
Current overload
protection (fuses).
Ÿ
Dust tight slip
ring.
Ÿ
230VAC/3PH/60HZ
Motors & VF Drives.
Structure
Ÿ
Formed steel tower.
Note: Depending upon system design and options,
other controls may be required.
Technical Information
Ÿ
The machine is
provided with a manual including electro/mechanical schematics
and drawings.
Note: additional conveyor available upon request.
