PRODUCTION

• 40-50 loads per hr., based on load configuration and machine options.

LOAD WEIGHT

• 4,000 lbs

MACHINE DIMENSIONS

• 60"W x 120"L x 93"H.
• * 72"W x 120"L x 93H - 72" Dia.

LOAD SIZE

• 56"W x 56"L x 80"H.

ELECTRICAL REQUIREMENTS

• 120/1/60 15A (Default)
• 230V/3/60 10A or 240/1/60 10A
  * Upon P.O request

APPROXIMATE SHIPPING WEIGHT

• 2,346 lbs.
• * 2,473 lbs.

CONTROLS

• Siemens PLC S7-200-224.
• 24V control system.
• Current overload protection.
• Control cabinet incorporated in tower.
• Autoheight sensing photoeye with On/Off switch.
• Power On/Off switch and indicator light.
• Separate Start/Stop push button and large emergency stop (push pull type).
• Manual carriage up/down switch.
• Variable table speed (12 RPM).
• Separate Up/down carriage speed.
• Separate top and bottom wrap selectors (0-9).
• Reinforced wrap/manual rotation control.
• Positive turntable alignment.
• Top cover pause switch (Splash-proof program).
• Spiral up, Spiral Up/Down.
• Film force to load control.

FILM DELIVERY SYSTEM

• 20" NO-THREAD™ Powered Pre-Stretch Carriage.
• 1/2 HP AC Motor with variable Frequency Drive.
• 50-300% pre-stretch ratio (preset to customer spec. Std 200%).
• Electric film tension control with linear device.
• Film roping bar.
• Lexan roller cover.
• Film force release for easy pull at start and end of cycle.

FILM CARRIAGE DRIVE

• 1/2 HP AC motor with variable frequency drive.
• Two #40 chain carriage lifts for safety.
• Dual ½” CRS ways with UHMW-PE carriage glides.

TURNTABLE

• 60" dia. 3/8" steel plate.
• 22 heavy duty non-metallic lube-free table supports.
• 2-7/8" table height.
• 2-5/8” high base with full surround for safety and strength.
• Chain slots for easy pulling or dragging.
• * Ramp accessibility on all three sides.

TURNTABLE DRIVE

• Max. 12 RPM variable speed.
• 1/2 HP AC motor with variable frequency drive.
• #50 ANSI heavy duty chain drive.
• Electronic softstart / softstop.
• Positive turntable alignment controlled by proximity sensor.

STRUCTURE

• Formed steel tower consisting of 11 guage front section and 14 gauge back cabinet section with lockable door.
• Forklift portable base design (from both ends).
• Heavy duty structural steel construction.

TECHNICAL INFORMATION

The machine is provided with a manual including:

• electro/mechanical schematics and drawings.
• Troubleshooting guide.
• Installation instructions.

WARRANTY

• All Wulftec automatic machines come with a three-year warranty.
• All Wulftec pre-stretched compound rollers have a lifetime warranty.