Tower Structure

• The CRS slide ways with UHMW bearings allows for smooth operation.
• Flat cable (designed for constant flexing) is used for carriage power while competitors use regular power cord which is prone to shorting due to the constant flexing.
• Dual chain lift drive (similar to a Forklift) is used to ensure smooth,effortless lifting of the carriage. Competitive single chain design causes chatter and uneven motion.

« BACK

No-Thread Film Carriage

• Auto-height Photo-eye mounted in carriage for protection.
• CARRIAGE DOOR OPENS FOR EFFORTLESS ROLL CHANGE
  Simply open the door, lay the film across and close the door. Its that simple !!!
• Dual Safety Latch ensures door is closed during carriage.
• Lexan Cover is in front of the carriage preventing the operator from putting their hands inside while the rollers are turning.
• Dual Upper & Lower carriage limits.

« BACK

Table Drive
WHP-150 , WHP-200

• 4 casters each rated for 2000Lbs. support the table.
• Direct chain drive ensures positive rotation compared to belt slippage and friction wear found with competitive drive systems.
• Full structural steel frame supports the load.

« BACK

Table Drive / Ring Gear Drive
WHP-300 , WHP-CRW

Direct drive ring gear bearings are used on motor cranes, hydraulic excavators, foundry equipment, and army tanks due to their ability to withstand harsh environments while supporting large oversized structures.

• High torque capacity.
• Positioning accuracy.
• Stopping time is precise and instantaneous. (E-Stops).
• 37,000 lbs. of dynamic force capacity.
• Precision ground bearing support guarantees even loading of weight.
• 10 Years warranty.

« BACK

AC Motor Controls / Variable Frequency Drives (VFD)

• No maintenance required compared to DC Motors and drives used by the competition.
• Provide unlimited control of speeds, accel, and decel along with starting power compared with throw-away DC boards.
• Totally enclosed drives provides unrivaled safety compared to the hazardous DC boards used by the competition.
• Alarm diagnostics enable simple troubleshooting.
• Exact digital adjustments compared to guesswork with thumbwheels on competitive DC Boards.
• Internal surge protection protects against blowing the board (very common in DC boards).

« BACK

Control Panel
WHP-150

• NEMA 4 (Water Tight) enclosure.
• NEMA 4 X (corrosion proof) selector switches.
• Safety Push/pull E-Stop.
• Complete jog & speed adjustment controls.
• Start push button.
• Separate Top & Bottom wrap counters.
• Reinforce wrap button applies more film anytime during the wrap cycle when extra film is needed.

« BACK

Control Panel
WHP-200 , WHP-300 , WHP-CRW

• Remote Stand Alone Cabinet.
• NEMA 4 X (corrosion proof) selector switches.
• Push/Pull Safety E-Stop.
• Separate up /down Carriage speed adjustment improves film savings.
• Separate 0-9 top & bottom wrap selection.
• Adjustable film tension control.
• Auto height Photo-eye on/off selector.
• Broken Film alarm.

« BACK

Cocoon Roller System
WHP-CRW

• Cradle rollers controlled with variable frequency drive.
• Cast Iron Pillow Block Bearing support.
• 24”- 52” Dia rolls std. capacity, increased roll capacity available.
• Optional kicker for rolling loads off the table.
• Optional lifter systems available.

« BACK